Emergency Water Extraction — Memphis, TN
Emergency Water Extraction in Memphis can mean a $200 fix or a $4,000 job depending on what's actually wrong. We figure it out before quoting. What we won't do: try to sell you a service plan, push the most expensive option, or send a sales rep before sending a tech.
Local context for Memphis
We dispatch from a shop near the city limits, so Memphis runs are quick. Suburbs and outlying towns run longer.
Most of our Memphis emergency water extraction jobs come from older neighborhoods, where the housing stock just has more failure points.
A recent emergency water extraction call
Last spring we got a call from a homeowner near the south side Memphis. A basement with 18 inches of clean water after a hot water tank burst. Diagnosis: tank corrosion at the seam. We pumped 4,200 gallons in 2 hours, extracted absorbed water from carpet, drying setup in place by midnight, ran the test, and were out the door in under 90 minutes. Total: $312 including parts.
The actual work
Standing water needs to come out within the first 4 to 8 hours of a water event. Past that window, drywall, flooring, and substrate begin absorbing moisture into adjacent dry areas, multiplying the loss.
Our extraction trucks carry submersible pumps for deep standing water plus truck-mounted vacuum extractors for carpet, padding, and porous surfaces. We can extract 2,000+ gallons per hour from a single building.
On arrival, the crew lead does a moisture map of the affected area, identifies the source (if not already controlled), and starts extraction in the lowest, deepest, slowest-evaporating areas first. Drying equipment goes in immediately after extraction.
Documentation is part of the job. Every moisture reading, every gallon extracted, every piece of equipment is logged. That logbook becomes your insurance-claim evidence.
Cost range
For emergency water extraction jobs in the Memphis area:
- Emergency dispatch fee: $85 – $230
- Standing-water extraction (per 1000 sqft affected): $600 – $1,290
- Truck-mounted carpet extraction: $0.40 – $0.85 per sqft
- Drying setup (5-day standard): $1,290 – $2,575 per affected zone